Client: National HighwaysPrincipal Contractor: Balfour BeattyDesign: SwecoWorks Commenced: November 2022Works Completed: August 2023 The Myton Swing Bridge is an asymmetric cable-stayed structure featuring a steel twin box girder deck. It spans 55.6 metres at the front and 28.4 metres to…
Read more
Client: National HighwaysPrincipal Contractor: FreyssinetWorks Commenced: 2023Works Completed: 2024 Patrixbourne Bridge is a three-span supported overbridge constructed in 1974. The structure is located to the south of Canterbury and carries the A2 over Patrixbourne Road and the Nail Bourne waterway….
Read more
Client: National HighwaysDesigner: Kier Highways Design ServicesPrincipal Contractor: MJ ChurchWorks Commenced: ECI February 2020 / On site November 2020Works Completed: 2022 Bridge Strengthening & Post-tensioning Special Inspection (PTSI) The M5 junction 11 Golden Valley Interchange comprises of two bridges supporting…
Read more
St Albans Road, South Mimms, Hertfordshire – Bearing replacement and concrete repairs Client: Jackson Civil Engineering (JCE)Designer: AtkinsPrincipal Contractor: Jackson Civil Engineering (JCE)Works Commenced: February 2021Works Completed: April 2021 St Albans road bridge crosses the A1(M) near Potters Bar. Regular…
Read more
Langley Footbridge, Langley Interchange, Slough – Bearing replacement Client: Slough Borough CouncilDesigner: Freyssinet LimitedPrincipal Contractor: Freyssinet LimitedWorks Commenced: April 2021Works Completed: July 2021 Langley Footbridge crosses the M4 junction 5 interchange in Slough and provides a vital link for cyclists…
Read more
Freyssinet recently completed bearing replacement works on Langley Footbridge, which crosses the M4 junction 5 interchange in Slough. Regular monitoring inspections by Client Slough Borough Council had indicated that the bridge bearings had reached their designed life span and were…
Read more
Freyssinet was enlisted by Balfour Beatty to design and manufacture the bridge bearings, to design, manufacture and install the expansion joints and also to design, manufacture and tune the Tuned Mass Dampers (TMDs).
Structural Components for Bridges – Telford Footbridge, Shropshire Client: Telford & Wrekin Council Main Contractor: Balfour Beatty Architect: Nicholl Russell Studios Engineer: Jacobs Steel Manufacturer: SH Structures Works Completed: March 2019 DOWNLOAD CASE STUDY PDF HERE Telford Footbridge provides a…
Read more
Aberdeenshire is suffering from a large-scale problem of crumbling bridges, so much so that it requires a significant funding of £3.35 million to be able to bring them back into good condition. The Press and Journal revealed that 65 out…
Read more
London Bridge Station was recently reopened by the Duke of Cambridge, Prince William after a five year, £1billion transformation by Network Rail, nearly doubling its passenger capacity and providing faster connections for passengers. The Thameslink route, created in partnership between…
Read more