Isle of Wight Council
Medina Bridge is located in Newport, the principle town of the Isle of Wight, and carries the A3020 dual carriageway over the River Medina. The bridge comprises a pair of continuous three span pre-stressed insitu concrete decks with concrete abutments and piers and parapets.
Following a Principal Inspection carried out in 2006, it was determined that 4 No. fi xed end bearings required replacement.
Freyssinet Ltd was selected by the Isle of Wight Council as principle contractor for this project, responsible for the replacement of the deteriorated bearings, and all other associated works.
New bearings were designed by our in-house design team and manufactured at Freyssinet’s factory site in Telford.
The project had specific challenges presented by the unique top plate fixings. These were overcome by working closely with the design team.
The scope of works for this contract included design and manufacture of new bearings, site setup, design and implementation of temporary works (jacking of the bridge deck), traffic management, hydrodemolition of the bearing shelves, installation of new bearings and reconstruction of the bearing shelves.
The works were carried out to the satisfaction of the client and all parties involved.
1 Medina Bridge
2 Original bearing / Temporary jacking
3 Site works
4 Site works
Freyssinet Ltd. Innovation House, Euston Way, Town Centre, Telford, Shropshire, TF3 4LT Phone +44 (0) 1952 201901 Fax +44 (0) 1952 201753 Email firstname.lastname@example.org